undefined
The Cover Guy

How to lower the Alkalinity in your hot tub?

Did you know one of the most serious problems for hot tubs and hot tub covers results from too much acidity or alkalinity? 

 Too much acidity or alkalinity can cause : 

  • Corrosion of the hot tub’s metal parts, including pumps and jets 
  • White or rust-colored scales on your hot tub’s plumbing 

Chlorine  

When dissolved in water, chlorine forms an alkaline compound that raises the pH. Chlorine loses its effectiveness around pH 7.8, becoming an oxidation agent that corrodes the metal in your hot tub instead of killing bacteria. 

Is the Alkalinity in your hot tub high?

More specifically, alkalinity is the capacity of water to resist acidification. To put it simply, alkalinity acts as pH’s bodyguard, which is the measure of the acidity or base of your hot tub water. Without alkalinity, the pH would be quite out of balance. 

The goal? Keep the pH balanced between 7.4 and 7.6. If the pH reading is higher, the alkalinity of your hot tub is probably too high. By balancing a high pH, you will decrease the alkalinity of your hot tub.

What are the causes of a high alkalinity in a hot tub? 

  • Too many chemicals
  • Sweat, lotions, perfumes and other bodily fluids
  • Water source (quality)
  • Human error

What happens when the alkalinity in your hot tub is too high? 

When the alkalinity is too high in a hot tub, it can make your sanitizer (chlorine, bromine, etc.) useless. Bacteria can also grow in the water and cause problems in addition to causing skin problems. In addition, it can cause scale problems in your hot tub.

How to lower the alkalinity of your hot tub?

GOOD TO KNOW

If you are using municipal water and our pH decreaser, the hot tub pH will likely remain in the normal range of 7.2-7.8.

It is still a good idea to test the alkalinity on occasion, to ensure your municipality’s water treatment facilities are maintaining the quality of the water.

Testing your pH is essential. Dissolved solids in well water can lead to a huge range of pH values, from very acidic to very alkaline. 

Should you adjust alkalinity or pH first?

Increasing alkalinity will also increase pH. If both readings are low, start by increasing the alkalinity first with our alkalinity booster. Then test the water again. If the pH is still low, but the alkalinity is good, just add a pH accelerator.

Should I correct the pH with white vinegar or baking soda? 

This is generally not a good idea.

Vinegar and baking soda can interact with other dissolved solids and cause scaling. It can also lead to bad odours coming from your hot tub.

Avoid headaches by investing in hot tub pH balance adjusters : odourless, colorless, concentrated acidic and alkaline solutions designed to alter pH without interacting with any dissolved solids or chemicals. The Cover Guy has everything you need for your hot tub!

  • How to Avoid Heatstroke in a Hot Tub

    Although hot tubs are a fabulous way to spend time with loved ones, the experience can become unpleasant if certain precautions are not taken.  The water’s intense heat can cause health problems for some, with heatstroke being the most common occurrence. Heatstroke happens when internal body organs heat up and stop working properly.  Sweat naturally […]

  • Vita Spas Error Codes & Information

    Vita Spas Vita Spas designed the industry’s first hot tub that was built to be appliance grade. They also utilize a steel frame as one of the essential building blocks for each of their products. Their focus on hydrotherapy includes the same level of therapeutic relief that consumers would receive by visiting a massage therapist. […]

  • Weekly maintenance hot tub checklist

    If you own a hot tub, it is imperative that you maintain it. Taking the time to inspect and service your tub once a week is the best thing you can do to keep it running well, as well as to prevent potential damage. To make the process easy and to be consistent in your […]