Download our FREE
Time to open the swimming pool. Spring is here and the swimming pool season is about to kick off. Maybe you just bought a home with a swimming pool, or you just installed a pool last summer and this is your first swimming pool opening, and maybe your going to attempt your own opening this year after watching the pool guy do it for years, and just maybe your a veteran and just want to pickup some new tips. Whatever your station opening a pool for the Summer is easy, just follow this guide and you will be swimming in no time.
Tip #1 If you are wondering when the best time to open your pool, I am a firm believer in opening the pool early, if you wait too long you will risk the chance of opening up to a huge mess. I always try to open the pool either before the first hot day or shortly after. Hot days heat up the stagnate water under your pool cover and that will create algae.
- Submersible pump is needed to drain water from the pool, hot tub, off the pool cover etc… great addition to your toys/equipment
- Shop-vac is great for not only sucking up wet and dry debris, but also is needed to blowing out lines in the winter.
- Pressure washer, garden hose, & deluxe spray gun these all go into one heading but basically have a good system for cleaning stuff off. Better to pay a little more and have a good hose and spray gun, and a pressure washer will help you keep your whole house clean.
- Sponges & rags are great for cleaning up around the pool, patio, and hot tub. Have your own outside so you don’t get in trouble for staining the matching kitchen towels. (experience on this one)
Tip #3 if you found that you were losing pressure at the end of the pool season the year before it might be a good idea to check the filter media and see if it needs replacing. This is something you can do weeks or days in advance of your pool opening and will save you time on the day you do open your pool.
When you’re ready to open the swimming pool the first step is to use the submersible pump and remove the water from the top of the winter pool cover. Its best not to try and remove the winter cover before the water is removed because you risk the chance of having the debris on top of the winter cover falling into the pool. Unfortunately I have learned this from experience, and I would add to be patient and let all the water possible be drained from the top of the winter pool cover before attempting to remove the cover.
Tip #4 Start filling your pool while you are draining the water off the top of your winter cover. If you live in a rural community and use well water use a carbon pre filter on your hose when filling your pool. Locate and replace all fittings, plugs, and drain covers from your filter, pumps, and heaters but do not turn anything on yet. Remove all plugs, gizmos, foam etc. from pipes and skimmer and replace jets, skimmer and any other accessories. This saves time and you will be able to start your equipment sooner.
The next thing you must do is to remove the debris from the top of the winter cover. You can start this process with your leaf net when you are removing the water from the top of the cover. Try to remove as much debris as possible because the more that is on the winter cover when you remove the cover the more chance of debris getting into your pool when you remove the winter cover.
Once you have removed the debris it is time to take the winter cover off. I start by removing the water bags from one end of the pool and slowly roll the cover towards the end removing water bags on either side as I move down the pool. The same technique can be used for all covers and at the end you should have caught all remaining debris that should be easily lifted away from the pool with the winter cover.
Once your water is up to level which is about 2/3 up the skimmer, you can do a final check of all the connections and plugs, put your filter in the waste selection, roll out your backwash hose, open up your air relief at the top of your filter, fill your pump basket with water to get your prime, and start your system. Once all the air is released you will see water spraying out the top of your filter, close the valve and turn off your system. Change your filter setting to filter and turn the system back on. I add a concentrated algaecide at this point making sure to broadcast it around the perimeter of the swimming pool. After 24 hours of circulation test your pool water for PH and Chlorine and adjust accordingly. The chemical levels should be PH 7.2 – 7.6 ppm and chlorine 1.5 – 2.0 ppm.
Take your swimming pool cover and water bags out to the driveway remove all debris and wash them, let them dry out fold and store for the fall. Replace all your steps, ladders, and diving boards and tighten them down. Power wash the deck, and clean the scum line of your pool. And you’re done.
Tip #5 If you have a hot tub open it at the same time, or if it was running all winter this is a great time to change the water and clean or replace your hot tub filters. Use a carbon pre filter on your hose when filling your hot tub. Also clean and and remove debris from your hot tub cover, and replace it if it weighs more then 100 lbs. or is deteriorated beyond use.
And with that you have turned your winter hibernating backyard back into your Summer getaway oasis!